FiberLink CompactLine

16 x 1 non redundant and 4 x 1:1, 4 x 2+1 & 2 x 4+1 redundant RF-over-Fiber System

The 16×1, 4×1:1, 4×2+1 and 2×4+1 redundant RF-over-Fiber system of our FiberLink CompactLine Series comes in a 1RU/19″ chassis and an IP65 ODB. It is designed for flexible, high quality and secure optical transmission of up to 4×2 or 2×4 RF signals (L-Band, Extended L-Band and Broadband 3,2GHt) over a distance of up to 20km.

This redundant RF-over-Fiber allows a quattro 2+1 /1:1 or a dual 4+1 redundant configuration and can be populated with 8/12 active optical TX/RX modules and up to 2/4 hot-standby TX/RX modules.

The chassis are designed to allow a mixed population with TX/RX modules within the same chassis, while the chassis are equipped with corresponding RF ports (50Ohm or 75Ohm), which are used either as input or output port as per the individual configuration.

The system features automatic 2+1/4+1 redundancy switching as per preconfigured configurations. Once an error at a TX or RX module occurs, the system automatically activates a switchover to a backup TX or RX module thus ensuring an interference free signal transmission at any time.

Rack-mounted RF equipment with multiple connectors, status display, power input, and networking ports.

Features & Benefits

  • Versatile16x1, 4×1:1, 4×2+1 & 2×4+1 redundant RF-over-Fiber

  • Supporting IF 200MHz, L-Band 950 – 2150MHz, Ext. L-Band 850 – 2450MHz and Broadband 50Mhz – 3250MHz

  • 1RU/19″ chassis for 1:1, 2+1 and 4+1 redundant operation

  • Manual and automatic redundancy switching

  • Backup Ports are available at rear side for additional use

  • Automatic Frequency and Level equalization (Option)

  • Support of mixed TX/RX population

  • Variable gain control at each TX/RX module

  • RF power monitoring at each TX/RX module

  • Status LED´s for each TX/RX module

  • Easy local & remote configuration & monitoring

  • Laser, link, PSU & access status monitoring

  • 1:1 redundant dual power supply